Please use this identifier to cite or link to this item: http://ddms.usim.edu.my:80/jspui/handle/123456789/8218
Title: Highly sensitive fluorescence optode for aluminium(III) based on non-plasticized polymer inclusion membrane
Authors: Faiz Bukhari, Mohd Suah,
Lee Yook, Heng,
Musa, Ahmad,
Keywords: Aluminium(III) determination
Optical sensor
Polymer inclusion membrane
Aliquat 336
Sodium morin-5-sulphonate
NaMSA
Issue Date: 2014
Publisher: Elsevier Science Sa
Abstract: A highly sensitive and simple reagent immobilization procedure for a non-plasticized fluorescence optode based on polymer inclusion membranes (PIM) has been developed. The preparation procedure is based on physical immobilization procedure, namely encapsulation technique which produces an optical sensing membrane. The sensitive PIM contains poly (vinyl chloride) (PVC) as the base polymer, Aliquat 336 as an extractant and sodium morin-5-sulphonate (NaMSA) as the reagent. The use of PIM has increased the response of the PIM based optode about five-fold enhancement compared to the non-PIM optode. The optimized optode was characterized by a linear calibration curve in the range from 5.19 x 10(-7) to 6.00 x 10(-5) mol L-1 of aluminium(III) (Al(III)), with a detection limit of 4.07 x 10-7 mol L-1. The response of the optode was three minutes and it was also found to be reproducible. The optode has been successfully tested for the determination of Al(III) in natural water samples and result obtained is comparable to atomic absorption spectrometry method. (C) 2014 Elsevier B.V. All rights reserved.
URI: http://ddms.usim.edu.my/handle/123456789/8218
ISSN: 0925-4005
Appears in Collections:Sensors and Actuators B-Chemical

Files in This Item:
File Description SizeFormat 
Highly sensitive fluorescence optode.pdf182.44 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.